Konica Minolta bizhub PRO 920 Service Manual page 175

Field Service Ver2.0 Aug.2005
[1]
[5]
[1]
[3]
[2]
[3] [4]
[2]
57gaf2c313nb
[5] [3]
[4]
57gaf2c314nb
9.
Open the paper reverse/exit section [1].
10.
Remove the 2 screws [2] and then remove the fan
holder cover assembly [3].
Note
• The fan holder cover assembly is left con-
nected with the wiring [4]. After removing the
fan holder cover assembly, be sure to put it
on the fusing guide rail assembly [5].
11.
Remove the connectors [1] and [2].
12.
Remove the 5 screws [3] and then remove the
fusing guide rail assembly [4].
Note
• The fusing guide rail assembly is left con-
nected with the wiring. After removing it, be
sure to evacuate it to the rear side with the
fan holder cover assembly [5] put on it.
3. PERIODIC CHECK
143