Konica Minolta bizhub PRO 920 Service Manual page 484

12. JAM CODE
Classifica- Jam code
tion
DF J62-10
J63-01
J63-02
J63-03
J63-04
J63-05
J63-06
J63-07
452
Cause
When exiting a large size double sided
original, the original exit sensor /Lt
(PS307) does not turn OFF within a
specified period of time after it turns
ON.
When outputting a large size double
sided original from the reverse section,
the original reverse sensor (PS309)
does not turn ON.
When entering a large size double sided
original into the reverse section, the
original reverse sensor (PS309) does
not turn OFF within a specified period of
time after it turns ON.
When outputting a large size double
sided original from the reverse section,
the original reverse sensor (PS309)
does not turn OFF within a specified
period of time after it turns ON.
When exiting a small size single sided
original, the original exit sensor /Rt
(PS314) does not turn ON within a
specified period of time after the original
reverse sensor (PS309) turns ON.
When exiting a small size double sided
original, the original exit sensor /Rt
(PS314) does not turn ON within a
specified period of time after the original
reverse/exit sensor (PS313) turns ON.
When exiting a small size single sided
original, the original exit sensor /Rt
(PS314) does not turn OFF within a
specified period of time after it turns
ON.
When exiting a small size double sided
original, the original exit sensor /Rt
(PS314) does not turn OFF within a
specified period of time after it turns
ON.
Field Service Ver2.0 Aug.2005
Resulting Correction
operation
The DF stops Open the open/close
immediately. cover and remove
If there is paper jammed paper if any.
being trans-
ferred or having
been trans-
ferred, the main
body completes
the paper exit
before stopping
operations.