Hood Fitment And Bumpers - Factory Five Racing MK4 ROADSTER Assembly Manual

Check the outside corners of the dash tube. Make sure there is a ½" or so gap between the body and
frame. Try pushing down on the body here, it should move.
If the tube touches it will affect the door front corner fitment. Use an adjustable or ¾" wrench to bend
the tube down a bit, it will go easily the tubing has a thin wall.

Hood Fitment and bumpers


Orbital sander, air saw,

Hood, Secondary body fasteners
" drill bit, drill, rivet gun
/
1 8
359
www.factoryfive.com 508-291-3443