1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SFI
−
FUEL CUT RPM
FUEL CUT RPM
INSPECTION
1.
WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
2.
CONNECT TOYOTA HAND−HELD TESTER OR OBD II
SCAN TOOL
(a)
Remove the fuse cover on the instrument panel.
(b)
Connect the TOYOTA hand−held tester or OBD II scan
tool to the DLC3.
(c)
Please refer to the TOYOTA hand−held tester or OBD II
scan tool operator's manual for further details.
3.
INSPECT FUEL CUTOFF PRM
(a)
Increase the engine speed to at least 3,500 rpm.
(b)
Use a sound scope to check for injector operating noise.
(c)
Check that when the throttle lever is released, injector op-
eration noise stops momentarily and then resumes.
HINT:
Measure with the A/C OFF.
Fuel return rpm: 1,200 rpm
4.
DISCONNECT TOYOTA HAND−HELD TESTER OR
OBD II SCAN TOOL
Author :
Brought to you by BirfMark
Version 1.00 - 12/21/2010
SF−67
SF0Q2−08
Date :
695