Toyota 1996 LAND CRUISER User Manual page 1021

Color
Drit Mark
Drit Mark
Bearing Cup
Type A
610.0 mm (24.016 in.)
Y
Type B
545.0 mm (21.457 in.)
Y
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
PROPELLER SHAFT
5. SELECT SPIDER BEARING
Select the bearing according to whether or not there is a drill
mark on the yoke section.
Yoke
w/ drill mark
No drill mark
Z04247
HINT:
At time of the reassemble, there are 2 types of rear propeller
shafts, type A and type B. Referring to the illustration, measure
the distance between the welding points X and Y to identify
Differential
X
which of the 2 types is used for the vehicle.
Side
X
Q07142
6. INSTALL SPIDER BEARING
(a) Apply MP grease to a new spider and bearings.
NOTICE:
Be careful not to apply too much grease.
(b) Align the matchmarks on the yoke and flange.
Z00755
(c) Fit the spider into the yoke.
(d) Using SST, install the bearings on the spider.
SST
PR0081
(e) Using SST, adjust both bearings so that the snap ring
grooves are at maximum and equal widths.
Q07338
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− SPIDER BEARING
Yoke Bearing (Type A)
w/ color mark (White)
No color mark
09332−25010
Author :
PR−7
Bearing (Type B)
w/ color mark (Red)
No color mark
Date : 855