SR−48
Alignment Marks
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
STEERING
−
STEERING LINKAGE
6.
INSTALL PITMAN ARM
(a)
Align the alignment marks on the pitman arm and the
cross shaft, and install the spring washer and set nut.
Torque: 177 N·m (1,800 kgf·cm, 130 ft·lbf)
(b)
Connect the pitman arm to the relay rod assembly.
(c)
Torque the nut.
Torque: 91 N·m (925 kgf·cm, 67 ft·lbf)
(d)
Install a new cotter pin.
7.
INSTALL ENGINE UNDER COVER
SR2922
Tighten the 4 bolts.
8.
CHECK FRONT WHEEL ALIGNMENT
(See page SA−4)
Brought to you by BirfMark
Version 1.00 - 12/21/2010