Toyota 1996 LAND CRUISER User Manual page 1105

Washer
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
If the teeth are not contacting properly, use the following chart
to select a proper washer for correction.
Washer thickness
Thickness mm (in.)
FA2041
18. REMOVE COMPANION FLANGE (See page SA−29)
19. REMOVE OIL SLINGER AND REAR BEARING
20. REMOVE REAR BEARING OUTER RACE AND OIL
STORAGE RING (See page SA−29)
21. INSTALL BEARING SPACER AND REAR BEARING
(a) Install a new bearing spacer on the shaft.
(b) Install a new oil storage ring and rear bearing outer race
(See page SA−29).
(c) Install the rear bearing and oil slinger.
W00529
22. INSTALL OIL SEAL
(a) Using SST, install a new oil seal, as shown.
SST
Oil seal drive in depth: 1.0 mm (0.039 in.)
(b) Apply MP grease to the oil seal lip.
SST
SA2407
23. INSTALL COMPANION FLANGE
(a) Install the companion flange with SST.
SST
R13140
Brought to you by BirfMark
Version 1.00 - 12/21/2010
FRONT DIFFERENTIAL CARRIER
1.70 (0.0669)
1.73 (0.0681)
1.76 (0.0693)
1.79 (0.0705)
1.82 (0.0717)
1.85 (0.0728)
1.88 (0.0740)
1.91 (0.0752)
1.94 (0.0764)
1.97 (0.0776)
2.00 (0.0787)
09214−76011
09550−30010 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03020)
SA−43
Thickness mm (in.)
2.03 (0.0799)
2.06 (0.0811)
2.09 (0.0823)
2.12 (0.0835)
2.15 (0.0846)
2.18 (0.0858)
2.21 (0.0870)
2.24 (0.0882)
2.27 (0.0894)
2.30 (0.0906)
2.33 (0.0917)