Toyota 1996 LAND CRUISER User Manual page 1035

RS−12
SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
SST
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
−
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
Battery
HINT:
Have a battery ready as the power source to deploy the airbag.
AB0158
(a) Check functioning of the SST.
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool.
SST
AB0152
(1)
Battery
HINT:
Do not connect the yellow connector which will be connected
with the supplemental restraint system.
AB0158
(2)
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
(b) Install the SST.
CAUTION:
H01580
Check that there is no looseness in the steering wheel and
steering wheel pad.
(1)
(2)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
STEERING WHEEL PAD AND SPIRAL CABLE
09082−00700
Connect the SST to the battery.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (−) terminal.
Check functioning of the SST.
Press the SST activation switch, and check that the
LED of the SST activation switch lights up.
Remove the steering column lower cover.
Remove the 3 screws and steering column lower
cover as shown in the illustration.
Disconnect the airbag connector of the spiral cable.