Toyota 1996 LAND CRUISER User Manual page 1022

PR−8
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
PROPELLER SHAFT − SPIDER BEARING
7. INSTALL SNAP RINGS
(a) Install 2 new snap rings of equal thickness which will allow
0 − 0.05 mm (0 − 0.0020 in.) axial play.
HINT:
Do not reuse the snap rings.
Thickness of snap ring:
Front Propeller Shaft and Rear Propeller Shaft (Type
B)
PR0069 Color
−
−
−
Brown
Blue
−
−
−
Rear Propeller Shaft (Type A)
Color
Brown
Blue
(b) Using a hammer, tap the yoke until there is no clearance
between the bearing outer race and snap ring.
8. CHECK SPIDER BEARING (See page PR−4)
Check that the spider bearing moves smoothly.
S
Check the spider bearing axial play.
S
Bearing axial play: Maximum 0.05 mm (0.0020 in.)
HINT:
Install a new spider bearing on the flange side in the pro-
S
cedure described above.
When replacing the spider bearing, be sure that the
S
grease fitting assembly hole is facing in the direction
PR0031
shown in the illustration.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
Mark
1
2
3
−
−
6
7
8
−
−
Author :
Thickness mm (in.)
2.100 − 2.150
(0.0827 − 0.0846)
2.150 − 2.200
(0.0846 − 0.0866)
2.200 − 2.250
(0.0866 − 0.0886)
2.250 − 2.300
(0.0886 − 0.0906)
2.300 − 2.350
(0.0906 − 0.0925)
2.350 − 2.400
(0.0925 − 0.0945)
2.400 − 2.450
(0.0945 − 0.0965)
2.450 − 2.500
(0.0965 − 0.0984)
Thickness mm (in.)
2.00 (0.0787)
2.03 (0.0799)
2.06 (0.0811)
2.09 (0.0823)
Date : 856