Toyota 1996 LAND CRUISER User Manual page 1370

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
assembly.
1. INSTALL DUST DEFLECTOR
(a) Using SST and a press, install a new dust deflector to the
front extension housing.
SST
(b) Using SST and a press, install a new dust deflector to the
front output shaft.
SST
SST
TF0967
2. INSTALL BALL BEARING
(a) Using SST and a press, install the ball bearing to the front
extension housing.
SST
SST
TF0943
(b) Select a snap ring that will allow minimum axial play.
(c) Using a screwdriver, install a new snap ring.
TF0939
3. INSTALL OIL SEAL
Using SST and a hammer, drive in a new oil seal to the front ex-
tension housing.
SST
SST
TF0945
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− FRONT EXTENSION HOUSING
09223−15020, 09950−70010 (09951−07150)
09316−20011, 09316−60011 (09316−00011)
09316−60011 (09316−00011, 09316−00031)
Mark
A
B
09316−60011 (09316−00011, 09316−00061)
Thickness mm (in.)
1.7 (0.0669)
1.8 (0.0709)
TR−27
TR0BG−01