Toyota 1996 LAND CRUISER User Manual page 1274

SR−24
SST
Screwdriver
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
STEERING
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
(a)
(b)
R08084
2.
(a)
(b)
3.
Soft Jaws
(a)
NOTICE:
Be careful not to damage the gear.
(b)
R08066
(c)
Press
NOTICE:
Be careful not to damage the gear. To avoid dropping the
PS pump assembly, support the pump assembly with your
hand.
(d)
SST
4.
R13187
Remove the O−ring from the union.
5.
(a)
NOTICE:
Take care not to damage the housing.
R08067
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− POWER STEERING VANE PUMP
MEASURE POWER STEERING VANE PUMP ROTAT-
ING TORQUE
Check that the pump rotates smoothly without abnormal
noise.
Using a torque wrench, check the pump rotating torque.
Rotation torque:
0.3 N·m (2.8 kgf·cm, 2.4 in.·lbf) or less
REMOVE SUCTION PORT UNION
Remove the bolt.
Remove the O−ring from the union.
REMOVE VANE PUMP DRIVE GEAR
Using soft jaws on a vise, clamp the gear in the vise.
Remove the gear set nut.
Using SST, press out the gear.
SST 09527−10011
Remove the woodruff key from the vane pump shaft.
REMOVE PRESSURE PORT UNION, FLOW CONTROL
VALVE AND SPRING
REMOVE REAR HOUSING AND WAVE WASHER
Using 2 screwdrivers, remove the snap ring.
SR16H−01