Toyota 1996 LAND CRUISER User Manual page 1377

TR−34
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − REAR EXTENSION HOUSING
4. INSTALL REAR OUTPUT SHAFT
(a) Using SST and a press, install the rear output shaft.
SST 09316−20011, 09316−60011 (09316−00011,
09316−00031)
(b) Install the 2 seal rings to the rear output shaft.
TF0969
(c) Select a snap ring that will allow minimum axial play.
Mark
1
2
3
4
(d) Using a snap ring expander, install a new snap ring.
TF0958
5. INSTALL VEHICLE SPEED SENSOR DRIVE GEAR
(a) Install the vehicle speed sensor drive gear.
(b) Using a snap ring expander, install the snap ring.
6. INSTALL OIL PUMP PLATE AND SEPARATOR
(a) Install the oil pump plate.
(b) Install the separator.
(c) Install and torque the 3 bolts.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
Q07138
7. INSTALL CENTER DIFFERENTIAL CONTROL COU-
PLING ASSEMBLY
(a) Install the coupling assembly to the output shaft.
(b) Using a snap ring expander, install the snap ring.
Q02549
8. INSTALL VALVE SEAT, BALL, SPRING AND SCREW
PLUG
(a) Apply gear oil to the ball.
(b) Install the valve seat, ball and spring.
(c) Apply liquid sealer to the screw plug.
Sealant: Part No. 08833−00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(d) Using a hexagon wrench, install and torque the screw
plug.
Q08384
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
Thickness mm (in.)
1.95 (0.0768)
2.05 (0.0807)
2.15 (0.0847)
2.25 (0.0886)