Toyota 1996 LAND CRUISER User Manual page 1351

TR−8
Removal
Socket Wrench
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER
16.
17.
Using a plastic hammer, remove the input shaft assembly.
TF0854
18.
TF0986
19.
(a)
(b)
TF0857
20.
Installation
(a)
(b)
(c)
21.
Socket Wrench
Remove the bolt and oil receiver.
Q07130
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− TRANSFER ASSEMBLY
FIPG: Part No. 08826−00090, THREE BOND 1281 or
equivalent
REMOVE 2 BEARING RACES FROM REAR CASE
REMOVE INPUT SHAFT ASSEMBLY
REMOVE IDLER GEAR ASSEMBLY, CENTER DIFFER-
ENTIAL ASSEMBLY, SHIFT FORK NO.1 AND SHIFT
FORK NO.1 SHAFT FROM FRONT CASE
SEPARATE SHIFT FORK NO.1 AND SHIFT FORK NO.1
SHAFT
Using a pin punch and hammer, drive out the slotted
spring pin.
Separate the shift fork No.1 and shift fork No.1 shaft.
REMOVE SHIFT OUTER LEVER AND INNER LEVER
Remove the nut and washer from the shift outer lever.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
Using a brass bar, hammer and socket wrench, tap out
the lever lock pin.
Remove the shift outer lever, washer and inner lever from
the front case.
REMOVE OIL RECEIVER FROM FRONT CASE
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)