SUPPLEMENTAL RESTRAINT SYSTEM
REPLACEMENT
In the following cases, replace the wire harness or connector.
If any part of the SRS wire harness or any connector has been found to be faulty in troubleshoot-
S
ing.
If any part of the SRS wire harness or any connector has been found to be faulty during the check
S
in items 2−(b) or (c).
NOTICE:
If the wire harness used in the SRS is damaged, replace the whole wire harness assembly.
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
−
WIRE HARNESS AND CONNECTOR
Brought to you by BirfMark
Version 1.00 - 12/21/2010
RS−39
RS0PI−01