Toyota 1996 LAND CRUISER User Manual page 1146

SA−84
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
19. REMOVE RING GEAR
(a) Place matchmarks on the ring gear and differential case.
(b) Remove the 12 ring gear set nuts and bolts.
(c) Using a plastic hammer, tap on the ring gear to remove it
from the differential case.
20. CHECK DIFFERENTIAL CASE RUNOUT
(a) Install the differential case in the differential carrier and
tighten the adjusting nut just to where there is no play in
the bearing.
(b) Using a dial indicator, measure the differential case run-
out.
Maximum case runout: 0.07 mm (0.0028 in.)
(c) Remove the differential case.
SA2464
21. w/o DIFFERENTIAL LOCK:
REMOVE SIDE BEARINGS FROM DIFFERENTIAL
CASE
Using SST, remove the 2 side bearings from the differential
case.
SST
22. w/ DIFFERENTIAL LOCK:
REMOVE SIDE BEARINGS FROM DIFFERENTIAL
CASE
(a) Using SST, remove the side bearing (ring gear side).
SST
HINT:
Fix the claws of SST to the notches in the differential case.
(b) Using SST, 4 bolts and a press, remove the side bearing
(cover side).
SST
HINT:
Fix the claws of SST to the notches in the differential case.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
REAR DIFFERENTIAL CARRIER
09950−40010 (09951−04010, 09952−04010,
09953−04020, 09955−04060, 09957−04010,
09958−04010), 09950−60010 (09951−00480)
09950−40010 (09951−04010, 09952−04010,
09953−04020, 09955−04060, 09957−04010,
09958−04010), 09950−60010 (09951−00480)
09550−10012 (09557−10010),
09950−70010 (09951−07150)