Toyota 1996 LAND CRUISER User Manual page 1378

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − REAR EXTENSION HOUSING
9. INSTALL DRIVEN ROTOR
(a) Apply gear oil to the driven rotor.
(b) Install the driven rotor.
10. INSTALL DRIVE ROTOR
(a) Apply gear oil to the drive rotor.
(b) Install the drive rotor.
HINT:
Align the alignment marks.
TF0977
11. INSTALL OIL PUMP COVER
(a) Install the oil pump cover.
(b) Using a torx socket wrench (T30), install and torque the
3 screws.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
NOTICE:
Align the oil hole of the rear extension housing and oil
groove end of the oil pump cover.
12. INSTALL OIL PUMP DRIVE SHAFT
Q00529
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TR−35