Toyota 1996 LAND CRUISER User Manual page 1291

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
STEERING − POWER STEERING GEAR
(d) Coat a new O−ring and metal spacer with power steering
fluid and install them.
(e) Using snap ring pliers, install a new snap ring.
(f) Coat a new teflon ring with power steering fluid.
(g) Form a teflon ring into a heart shape and install it with
hand.
(h) Using SST, form the teflon ring.
SST 09630−00014 (09631−00121)
NOTICE:
The teflon ring must be squeezed before inserting the
cross shaft or damage will result.
(i) Coat a new oil seal with power steering fluid.
(j) Using SST, press in the oil seal to the gear housing.
SST 09950−60010 (09951−00340, 09951−00450)
09950−70010 (09951−07200)
NOTICE:
Make sure you install the oil seal facing the correct direc-
tion.
5. IF NECESSARY, REPLACE TEFLON RING AND O−
RING
(a) Using a screwdriver, remove the teflon ring and O−ring
from the worm gear valve body assembly.
NOTICE:
Be careful not to damage the worm gear valve body assem-
bly.
(b) Coat a new O−ring with power steering fluid and install it.
(c) Expand a new teflon ring with your fingers.
NOTICE:
Be careful not to overexpand the teflon ring.
(d) Install the teflon ring.
(e) Coat the teflon ring with power steering fluid and snug it
down with piston ring compressor for 5 − 7 minutes.
SR2804
Brought to you by BirfMark
Version 1.00 - 12/21/2010
SR−39