Toyota 1996 LAND CRUISER User Manual page 1360

SST
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − IDLER GEAR
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
assembly.
1. INSTALL FRONT TAPER ROLLER BEARING
Using SST and a press, install the front taper roller bearing.
SST 09316−60011 (09316−00011, 09316−00031)
TF0893
2. INSTALL HIGH AND LOW CLUTCH SLEEVE
HINT:
Make sure to install the high and low clutch sleeve in the correct
direction.
3. INSTALL NEEDLE ROLLER BEARING AND IDLER
LOW GEAR TO IDLER GEAR
(a) Apply gear oil to the needle roller bearing.
(b) Install the needle roller bearing and idler low gear.
Q00538
4. INSTALL REAR TAPER ROLLER BEARING
Using SST and a press, install the rear taper roller bearing.
SST 09316−60011 (09316−00011, 09316−00071)
5. INSPECT IDLER LOW GEAR RADIAL AND THRUST
CLEARANCE
(See page TR−16)
TF0896
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TR−17
TR0BA−01