Toyota 1996 LAND CRUISER User Manual page 1362

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER −
DISASSEMBLY
1. INSPECT HIGH SPEED OUTPUT GEAR RADIAL AND
THRUST CLEARANCE
(a) Using a feeler gauge, measure the high speed output
gear thrust clearance.
Standard clearance:
0.10−0.25 mm (0.0039−0.0098 in.)
Maximum clearance:
0.25 mm (0.0098 in.)
TF0900
(b) Using a dial indicator, measure the high speed output
gear radial clearance.
Standard clearance:
0.035−0.091 mm (0.0014−0.0036 in.)
Maximum clearance:
0.091 mm (0.0036 in.)
TF0944
2. REMOVE FRONT DRIVE GEAR PIECE
(a) Using a snap ring expander, remove the snap ring.
SST
(b) Using SST and a press, remove the front drive gear piece.
SST
NOTICE:
Be careful not to drop the center differential assembly.
Q07101
3. REMOVE FRONT TAPER ROLLER BEARING
Using SST and a press, remove the front taper roller bearing.
SST
SST
4. REMOVE HIGH SPEED OUTPUT GEAR
5. REMOVE NEEDLE ROLLER BEARING
6. REMOVE HIGH AND LOW CLUTCH SLEEVE AS-
SEMBLY
Q07102
7. REMOVE HIGH SPEED OUTPUT GEAR BUSHING
AND CLUTCH HUB
(a) Using SST and a press, remove the high speed output
gear bushing and clutch hub.
SST
SST
(b) Using a magnetic finger, remove the straight pin from the
differential front case.
Q07103
Brought to you by BirfMark
Version 1.00 - 12/21/2010
CENTER DIFFERENTIAL
09950−00020, 09950−60010 (09951−00320)
09950−00020
09550−00020, 09950−00030, 09950−60010
(09951−00320)
TR−19
TR0BC−01