Toyota 1996 LAND CRUISER User Manual page 1049

RS−26
SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
10 m (33 ft) or more
←
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
−
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
HINT:
Battery
Have a battery ready as the power source to deploy the airbag.
(a) Check functioning of the SST.
(See page RS−11)
AB0158
(b) Disconnect the airbag connector.
(1)
(2)
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(3)
(4)
(c) Install the SST.
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(2)
(3)
NOTICE:
Take care not to damage the SST wire harness.
(4)
→
R13455
(d) Deploy the airbag.
(1)
(2)
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
H03286
Brought to you by BirfMark
Version 1.00 - 12/21/2010
FRONT PASSENGER AIRBAG ASSEMBLY
Remove the glove compartment door.
Remove the No.1 under cover.
Pull up the connector.
Disconnect the airbag connector.
Connect the SST connector to the front passenger
airbag assembly connector.
09082−00700
Move the SST to at least 10 m (33 ft) away from the
front of the vehicle.
Close all the doors and windows of the vehicle.
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (+) termi-
nal.
Confirm that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
Press the SST activation switch and deploy the air-
bag.