Toyota 1996 LAND CRUISER User Manual page 1089

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
REMOVAL
1. w/ DIFFERENTIAL LOCK:
BEFORE REMOVAL, SHIFT FRONT DIFFERENTIAL
TO LOCK
(a) Turn the ignition switch to the ON position.
(b) Keep the center differential lock condition.
(c) Turn the differential lock control switch to the FR/RR posi-
tion and lock the front differential.
(d) Rotating the tires, check they are in the differential lock
condition.
(e) Disconnect the cable from the negative terminal of the
battery.
2. DRAIN DIFFERENTIAL OIL
3. REMOVE FRONT AXLE SHAFTS (See page SA−13)
4. REMOVE TIE ROD FROM KNUCKLE ARM
(See page SA−13)
5. REMOVE FRONT PROPELLER SHAFT
(See page PR−3)
6. w/ DIFFERENTIAL LOCK:
DISCONNECT CONNECTORS AND TUBE
HINT:
When connecting the tube of the harness side to the hose
S
of the actuator side, its depth of insertion is 15 mm (0.59
FA2038
in.).
Take care that water or equivalent does not adhere to the
S
connector and hose.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
FRONT DIFFERENTIAL CARRIER
SA−27
SA1UM−03