Toyota 1996 LAND CRUISER User Manual page 1067

+10°
Front
Side
B
A
Front
A: Inside
B: Outside
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
HINT:
+60°
The clamps opening must be positioned at the rear of the tie rod
end face within 60°±10° from the vehicle axis.
−10°
R05626
6. INSPECT WHEEL ANGLE
(a) Remove the caps of the knuckle stopper bolts and check
the steering angles.
FA0507
(b) Turn the steering wheel fully, and measure the turning
B A
angle.
HINT:
When the steering wheel is fully turned, make sure that the
wheel is not touching the body or brake flexible hose.
If maximum steering angles differ from the standard value, ad-
FA0018
just the wheel angle with the knuckle stopper bolts.
Torque: 44 N·m (450 kgf·cm, 33 ft·lbf)
If the wheel angle still cannot be adjusted within limits, inspect
and replace damaged or worn steering parts.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− FRONT WHEEL ALIGNMENT
Inside wheel
Outside wheel
Author :
SA−5
32°00' − 35°00'
31°00' (Reference)
Date : 862