Toyota 1996 LAND CRUISER User Manual page 1275

Extension Bar
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
STEERING
(b)
Rear Housing
Brass Bar
R11234
(c)
(d)
Rear Housing
6.
(a)
Wood Block
(b)
7.
R11235
NOTICE:
Be careful not to scratch the cam ring, rotor or vane plates.
8.
Remove the pin from the side front plate.
9.
(a)
R08075
(b)
R08074
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− POWER STEERING VANE PUMP
Using a brass bar and hammer, tap the housing so that
the spring force of the wave washer pushes the housing
forward.
Gently tap the PS pump assembly on a wood block and
remove the housing and washer.
Remove the O−ring from the housing.
REMOVE SIDE REAR PLATE
Gently tap the PS pump assembly on a wood block and
remove the plate.
Remove the O−ring from the plate.
REMOVE CAM RING, VANE PUMP ROTOR AND 10
VANE PLATES
REMOVE SHORTER STRAIGHT PIN
REMOVE VANE PUMP SHAFT WITH BEARING
Using snap ring pliers, remove the snap ring.
Using an extension bar and hammer, tap out the shaft
with the bearing.
SR−25