Toyota 1996 LAND CRUISER User Manual page 1232

1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SFI − THROTTLE BODY
(b) Apply vacuum to the throttle opener.
(c) Insert a 0.62 mm (0.024 in.) feeler gauge between the
throttle stop screw and stop lever.
(d) Connect the test probe of an ohmmeter to the terminals
IDL and E2 of the sensor.
(e) Gradually turn the sensor clockwise until the ohmmeter
deflects, and secure it with the 2 set screws.
(f) Recheck the continuity between terminals IDL and E2.
Clearance between
lever and stop screw
0.50 mm (0.020 in.)
0.75 mm (0.030 in.)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
SF−47
Continuity (IDL − E2)
Continuity
No continuity