SUPPLEMENTAL RESTRAINT SYSTEM
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
−
AIRBAG SENSOR ASSEMBLY
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
computers unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)
1.
REMOVE THESE PARTS:
(a)
Transfer shirt knob
(b)
Front console box
2.
REMOVE AIRBAG SENSOR ASSEMBLY
(a)
Disconnect the connector.
NOTICE:
Remove the connector with the sensor assembly installed.
(b)
Using a torx wrench remove the 4 screws and the airbag
sensor assembly.
Torx wrench: T40 (Part No. 09042−00020 or locally
manufactured tool)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
RS−33
RS0PE−01