Toyota 1996 LAND CRUISER User Manual page 1359

TR−16
SST
Socket Wrench
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − IDLER GEAR
DISASSEMBLY
1. INSPECT IDLER LOW GEAR RADIAL AND THRUST
CLEARANCE
(a) Using a feeler gauge, measure the idler low gear thrust
clearance.
Standard clearance:
0.125−0.275 mm (0.0049−0.0108 in.)
Maximum clearance:
0.275 mm (0.0108 in.)
TF0887
(b) Using a dial indicator, measure the idler low gear radial
clearance.
Standard clearance:
0.015−0.068 mm (0.0006−0.0027 in.)
Maximum clearance:
0.068 mm (0.0027 in.)
TF0888
2. REMOVE FRONT TAPER ROLLER BEARING
Using SST, remove the front taper roller bearing.
SST 09950−40010
Q07132
3. REMOVE REAR TAPER ROLLER BEARING
Using SST, a press and socket wrench, remove the rear taper
roller bearing.
SST 09950−00020
4. REMOVE IDLER LOW GEAR AND NEEDLE ROLLER
BEARING FROM IDLER GEAR
5. REMOVE HIGH AND LOW CLUTCH SLEEVE FROM
IDLER GEAR
Q07100
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TR0B9−01