Toyota 1996 LAND CRUISER User Manual page 1126

SA−64
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
INSPECTION
1. INSPECT REAR AXLE SHAFT
(a) Check for wear or damage.
(b) Using a dial indicator, check the runout of axle shaft.
Maximum runout: 0.8 mm (0.031 in.)
If the runout is greater than the maximum, replace the axle
shaft.
RA0377
2. REPLACE OIL SEAL
(a) Using SST, remove the oil seal.
SST
(b) Using SST and a hammer, install a new oil seal into the
hub.
SST
(c) Apply MP grease to the oil seal lip.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
REAR AXLE SHAFT
09308−00010
09517−36010
SA1V6−01