Toyota 1996 LAND CRUISER User Manual page 1352

SST
Push
Free
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − TRANSFER ASSEMBLY
22. REMOVE 2 BEARING RACES FROM FRONT CASE
(a) Using SST, remove the bearing race (for idler gear).
SST 09950−40010, 09950−60010 (09951−00320)
Q07131
HINT:
At the time of reassembly, please refer to the following item.
Using SST and a press, install the bearing race (for idler gear).
SST 09316−60011 (09316−00011, 09316−00041)
(b) Using a brass bar and hammer, remove the bearing race
(for output shaft).
TF0867
HINT:
At the time of reassembly, please refer to the following item.
Using SST and a press, install the bearing race (for the out put
shaft).
SST 09316−20011, 09316−60011 (09316−00011,
09316−00031)
23. INSPECT TRANSFER INDICATOR SWITCH
Check that there is continuity between the terminals, as shown.
Switch Position
Push
Free
If continuity is not as specified, replace the switch.
I19645
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TR−9
Specified
Continuity
No continuity