SUPPLEMENTAL RESTRAINT SYSTEM
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
−
FRONT PASSENGER AIRBAG ASSEMBLY
DISPOSAL
HINT:
When scrapping vehicle equipped with an SRS or disposing of
a front passenger airbag assembly, always first deploy the air-
bag in accordance with the procedure described below. If any
abnormality occurs with the airbag deployment, contact the
SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
When disposing of a front passenger airbag assembly with an
airbag deployed in a collision, follow the same procedure given
in step 1−(e) in "DISPOSAL".
CAUTION:
Never dispose of a front passenger airbag assembly
S
which has an undeployed airbag.
The airbag produces a sizeable exploding sound
S
when it deploys, so perform the operation out of
doors and where it will not create a nuisance to
nearby residents.
When deploying the airbag, always use the specified
S
SST (SRS Airbag Deployment Tool). Perform the op-
AB0152
eration in a place away from electrical noise.
SST
09082−00700
When deploying an airbag, perform the operation at
S
least 10 m (33 ft) away from the front passenger air-
bag assembly.
The front passenger airbag assembly is very hot
S
when the airbag is deployed, so leave it alone for at
least 30 minutes after deployment.
Use gloves and safety glasses when handling a front
S
passenger airbag assembly with deployed airbag.
Always wash your hands with water after completing
S
the operation.
Do not apply water, etc. to a front passenger airbag
S
assembly with deployed airbag.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
RS−25
RS0PB−01