Toyota 1996 LAND CRUISER User Manual page 1158

SA−96
Proper Contact
Washer
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
Heel Contact
Select an adjusting washer that will bring the drive
pinion closer to the ring gear.
Toe Contact
Select an adjusting washer that will shift the drive
pinion away from the ring gear.
If the teeth are not contacting properly, use the following chart
to select a proper washer for correction.
Thickness mm (in.)
FA2041
19. REMOVE COMPANION FLANGE (See page SA−29)
20. REMOVE OIL SLINGER AND FRONT BEARING (See
page SA−29)
21. INSTALL BEARING SPACER AND FRONT BEARING
(a) Install a new bearing spacer on the shaft.
(b) Install the front bearing and oil slinger.
SA2394
Brought to you by BirfMark
Version 1.00 - 12/21/2010
REAR DIFFERENTIAL CARRIER
Face Contact
1.05 (0.0413)
1.10 (0.0433)
1.15 (0.0453)
1.20 (0.0472)
1.25 (0.0492)
1.30 (0.0512)
Flank Contact
FA2013
Thickness mm (in.)
1.35 (0.0531)
1.40 (0.0551)
1.45 (0.0571)
1.50 (0.0591)
1.55 (0.0610)
−