Toyota 1996 LAND CRUISER User Manual page 1077

SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
REPLACEMENT
1. INSPECT KNUCKLE SPINDLE
Clean the knuckle spindle and inspect the bushing for wear or
damage.
2. REPLACE BUSHING
(a) Using SST, remove the bushing.
SST
SST
(b) Using SST and a press, install a new bushing into the
spindle.
SST
3. INSPECT BEARING
Clean the bearing and 2 outer races and inspect them for wear
or damage.
R08435
4. IF NECESSARY, REPLACE BEARING OUTER RACE
(a) Using a brass bar and hammer, remove the bearing outer
race.
(b) Using SST and a hammer, carefully install a new bearing
outer race.
SST
Z06889
5. INSPECT BIRFIELD JOINT INNER PARTS
(a) Hold the inner shaft in a vise.
(b) Place a brass bar against the joint inner race and remove
the outer shaft.
(c) Tilt the inner race and cage and take out the bearing balls
one by one.
FA0203
(d) Fit the 2 large openings in the cage against the protruding
parts of the outer shaft and remove the cage and inner
race.
(e) Remove the inner race from the cage though the large
opening.
(f) Clean and inspect the joint parts for wear or damage.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
STEERING KNUCKLE AND AXLE SHAFT
09612−65014 (09612−01010, 09612−01050)
09618−60010
09605−60010
SA−15
SA1UH−01