Toyota 1996 LAND CRUISER User Manual page 1109

3 2
5°
108°
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
(b) Ensure that the matchmarks of the pinion of the actuator
is in the extent between zero and 5 degrees clockwise
above the center line of the actuator.
If the matchmarks is not in this extent, rotate the pinion to be
matched. Do not supply the battery positive voltage directly be-
1.5 V
tween terminals. If the matchmarks come to the extension limit
of the rotation, do not electrify moreover.
Matchmark
(Groove)
R08154
(c) Install a new O−ring to the actuator.
(d) Apply a light coat of gear oil on the O−ring.
(e) Apply MP grease to the gear part.
SA2306
(f) Insert the actuator so that the long hole on the actuator
side fits with the knock pin on the carrier side.
HINT:
Do not damage the O−ring of the actuator.
(g) Align the actuator with the long hole and rotate the actua-
tor counterclockwise when the knock pin reaches the
right−hand side.
SA1992
(h) Install the actuator to the differential carrier with the bolt
so that the outermost rack tooth of the shift fork will fit the
matchmarks of the pinion of the actuator.
Torque: 26 N·m (270 kgf·cm, 20 ft·lbf)
R08218
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− FRONT DIFFERENTIAL CARRIER
SA−47