Toyota 1996 LAND CRUISER User Manual page 1369

TR−26
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER
DISASSEMBLY
1. REMOVE DRIVE CLUTCH HUB
(a) Using a snap ring expander, remove the snap ring.
(b) Using SST, remove the drive clutch hub.
SST
Q07133
2. REMOVE FRONT OUTPUT SHAFT
Using a plastic hammer, drive out the front output shaft.
3. REMOVE DUST DEFLECTOR
(a) Using SST and a press, remove the dust deflector.
SST
(b) Using a screwdriver and hammer, tap the dust deflector
and remove it from the extension housing.
4. REMOVE OIL SEAL
Using a screwdriver, pry out the oil seal from the front extension
housing.
TF0938
5. REMOVE BALL BEARING
(a) Using a screwdriver, remove the snap ring.
(b) Using SST and a press, remove the ball bearing.
SST
SST
TF0940
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− FRONT EXTENSION HOUSING
09950−40010
09950−00020
09316−60011 (09316−00011, 09316−00071)
TR0BF−01