Toyota 1996 LAND CRUISER User Manual page 1365

TR−22
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER −
(d) In the same way, measure the rear case backlash.
4. INSTALL STRAIGHT PIN TO PINION SHAFT
5. INSTALL REAR SIDE GEAR AND THRUST WASHER
6. INSTALL DIFFERENTIAL REAR CASE
Install the differential rear case and 12 set bolts.
7. TORQUE REAR CASE SET BOLT
(a) Torque the rear case 12 set bolts.
Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)
(b) Turn the pinion gear.
(c) Loosen the rear case 12 set bolts.
(d) Torque the rear case 12 set bolts.
Torque: 98 N·m (1,000 kgf·cm, 72 ft·lbf)
TF0920
8. INSTALL REAR TAPER ROLLER BEARING
Using SST and a press, install the rear taper roller bearing.
SST
SST
Q00534
9. INSTALL CLUTCH HUB
Using SST and a press, install the clutch hub.
SST
SST
Q00547
10. INSTALL HIGH SPEED OUTPUT GEAR BUSHING
(a) Apply MP grease to the straight pin.
(b) Install the straight pin, as shown.
Q00549
Brought to you by BirfMark
Version 1.00 - 12/21/2010
CENTER DIFFERENTIAL
1.85 (0.0728)
2.00 (0.0787)
2.15 (0.0846)
2.30 (0.0906)
09316−12010
09316−12010, 09316−60011 (09316−00011)
2.60 (0.1024)
2.75 (0.1083)
2.90 (0.1142)
3.05 (0.1201)