Toyota 1996 LAND CRUISER User Manual page 1288

SR−36
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
STEERING − POWER STEERING GEAR
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. SECURE PS GEAR ASSEMBLY IN VISE
Secure the gear assembly on SST and clamp SST in a vise.
SST 09630−00014 (09631−00142)
2. REMOVE ADJUSTING SCREW LOCK NUT AND SEAL
WASHER
3. REMOVE SIDE COVER
(a) Remove the 4 bolts.
(b) Turn the cross shaft adjusting screw clockwise until the
cover comes off.
(c) Remove the O−ring from the cover.
4. REMOVE CROSS SHAFT
Using a plastic hammer, tap on the cross shaft end and pull out
the shaft.
5. REMOVE POWER PISTON PLUNGER GUIDE NUT,
COMPRESSION SPRING, POWER PISTON PLUNGER
AND POWER PISTON PLUNGER GUIDE
(a) Using a hexagon wrench (10 mm), remove the plunger
guide nut.
(b) Remove the O−ring from the plunger guide nut.
6. REMOVE WORM GEAR VALVE BODY ASSEMBLY
(a) Remove the 4 bolts.
(b) Using SST, turn the valve body shaft clockwise with hold-
ing the worm gear by your finger so it cannot move.
SST 09616−00010
Brought to you by BirfMark
Version 1.00 - 12/21/2010
SR16N−01