Toyota 1996 LAND CRUISER User Manual page 1363

TR−20
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − CENTER DIFFERENTIAL
8. REMOVE REAR TAPER ROLLER BEARING
Using SST and a press, remove the rear taper roller bearing.
SST
SST
9. REMOVE DIFFERENTIAL REAR CASE
Remove the 12 bolts and differential rear case.
10. REMOVE REAR SIDE GEAR AND THRUST WASHER
11. REMOVE PINION SHAFT, PINION GEAR AND THRUST
WASHER
(a) Remove the straight pin from the pinion shaft.
Q07113
(b) Remove the pinion shaft, 2 pinion gears and thrust wash-
ers.
(c) Remove the front side gear and thrust washer.
12. REMOVE LOW GEAR
Using a plastic hammer, tap and remove the low gear.
NOTICE:
Be careful not to damage the low gear.
13. REMOVE NEEDLE ROLLER BEARING
(a) Using a screwdriver, remove the snap ring.
(b) Using SST and a hammer, remove the needle roller bear-
ing from the differential rear case.
SST
SST
Bearing
Q07114
Brought to you by BirfMark
Version 1.00 - 12/21/2010
09950−00020, 09950−60010 (09951−00320)
09223−00010, 09950−60010 (09951−00400),
09950−70010 (09951−07150)