Toyota 1996 LAND CRUISER User Manual page 1112

SA−50
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
REMOVAL
1. REMOVE FRONT WHEEL
Torque:
Steel wheel: 147 N·m (1,500 kgf·cm, 109 ft·lbf)
Aluminum wheel: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2. REMOVE FRONT SHOCK ABSORBER
(a) Jack up and support the axle housing.
(b) Hold the piston rod and remove the upper mounting nut.
Torque: 69 N·m (700 kgf·cm, 51 ft·lbf)
SA2662
(c) Hold the shock absorber and remove the lower mounting
nut, shock absorber, cushions and retainers.
Torque: 69 N·m (700 kgf·cm, 51 ft·lbf)
3. DISCONNECT STABILIZER BAR FROM AXLE HOUS-
ING (See page SA−60)
4. REMOVE COIL SPRING
(a) Jack down and support axle housing.
SA2663
(b) Using SST, compress the coil spring.
SST
NOTICE:
Do not use an impact wrench. It will damage the SST.
(c) Remove the coil spring.
HINT:
Align the coil spring end with the lower seat and install the coil
spring.
5. REMOVE FOLLOW SPRING
R13152
Remove the 2 nuts and follow spring.
Torque: 9.2 N·m (94 kgf·cm, 82 in.·lbf)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
COIL SPRING AND FRONT SHOCK ABSORBER
09727−30021
SA1US−01