Toyota 1996 LAND CRUISER User Manual page 1357

TR−14
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − INPUT SHAFT
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
assembly.
1. INSTALL FRONT BALL BEARING
Using SST and a press, install a new front ball bearing.
SST 09527−30010
Q00533
2. INSTALL INPUT GEAR
(a) Using a press, install the input gear.
(b) Select a snap ring that will allow minimum axial play.
Mark Thickness mm (in.)
A 2.00 (0.0787)
B 2.10 (0.0827)
C 2.20 (0.0866)
D 2.30 (0.0906)
E 2.40 (0.0945)
(c) Using a snap ring expander, install a new snap ring.
3. INSTALL REAR BALL BEARING
(a) Using SST and a press, install a new rear ball bearing.
SST 09316−60011 (09316−00031)
(b) Select a snap ring that will allow minimum axial play.
Mark
A
B
C
D
E
(c) Using a snap ring expander, install a new snap ring.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
Mark Thickness mm (in.)
F 2.50 (0.0984)
G 2.60 (0.1024)
H 2.70 (0.1063)
J 2.80 (0.1102)
− −
Thickness mm (in.)
2.00 (0.0787)
2.10 (0.0827)
2.20 (0.0866)
2.30 (0.0906)
2.40 (0.0945)
TR0B7−01