Toyota 1996 LAND CRUISER User Manual page 1375

TR−32
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER − REAR EXTENSION HOUSING
INSPECTION
1. INSPECT DRIVEN ROTOR BODY CLEARANCE
(a) Install the drive rotor to the driven rotor.
(b) Using a feeler gauge, measure the body clearance be-
tween the drive rotor and extension housing.
Standard body clearance:
0.08−0.17 mm (0.0031−0.0067 in.)
Maximum body clearance: 0.17 mm (0.0067 in.)
If the body clearance exceeds the maximum, replace the drive
Q02615
rotor or driven rotor.
2. INSPECT DRIVEN ROTOR TIP CLEARANCE
Using a feeler gauge, measure the tip clearance between the
driver rotor and driven rotor.
Standard tip clearance:
0.05−0.15 mm (0.0020−0.0059 in.)
Maximum tip clearance: 0.15 mm (0.0059 in.)
If the tip clearance exceeds the maximum, replace the drive ro-
tor or driven rotor.
Q02616
3. INSPECT OIL PUMP SIDE CLEARANCE
Using a steel straight edge and feeler gauge, measure the side
clearance of oil pump.
Standard side clearance:
0.03−0.10 mm (0.0012−0.0039 in.)
Maximum side clearance: 0.10 mm (0.0039 in.)
If the side clearance exceeds the maximum, replace the drive
rotor or driven rotor.
Q02617
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TR0BJ−01