1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER
−
6.
REMOVE TRANSFER INDICATOR SWITCH
Remove the Center Diff Lock indicator switch, L4 position
switch, Neutral position switch and 3 gaskets.
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
7.
REMOVE FRONT EXTENSION HOUSING
Remove the 6 bolts and front extension housing.
HINT:
If necessary, tap the front extension housing with a plastic ham-
mer.
Q04610
HINT:
At the time of reassembly, please refer to the following items.
Set the clutch sleeve in differential lock condition.
S
Apply FIPG to the front case.
S
FIPG: Part No. 08826−00090, THREE BOND 1281 or
equivalent
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
8.
REMOVE CLUTCH SLEEVE, SHIFT FORK NO.2
SHAFT AND SHIFT FORK NO.2
HINT:
At the time of reassebly, make sure to install the clutch sleeve
in the correct direction.
Front
Q00541
9.
SEPARATE SHIFT FORK NO.2 SHAFT AND SHIFT
FORK NO.2
(a)
Using 2 screwdrivers and a hammer, tap out the 3 snap
rings from the shift fork No.2 shaft.
(b)
Separate the shift fork No.2 shaft and shift fork No.2.
Q02950
10.
REMOVE REAR EXTENSION HOUSING
Remove the 9 bolts and rear extension housing.
HINT:
If necessary, tap the rear extension housing with a plastic ham-
FIPG
mer.
HINT:
At the time of reassembly, apply FIPG to the rear case.
FIPG: Part No. 08826−00090, THREE BOND 1281 or
equivalent
Q07125
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TRANSFER ASSEMBLY
TR−5