TR−30
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER
−
REAR EXTENSION HOUSING
DISASSEMBLY
1.
REMOVE OIL PUMP DRIVE SHAFT
2.
REMOVE OIL PUMP COVER
(a)
Using a torx socket wrench (T30), remove the 3 screws.
(b)
Install the 2 suitable bolts to the pump cover.
(c)
Remove the pump cover from the rear extension
housing.
3.
REMOVE DRIVE ROTOR FROM DRIVEN ROTOR
4.
REMOVE DRIVEN ROTOR FROM REAR EXTENSION
Q00530
HOUSING
5.
REMOVE SCREW PLUG, SPRING, BALL AND VALVE
SEAT
(a)
Using a hexagon wrench, remove the screw plug.
(b)
Using a magnetic finger, remove the spring, ball and valve
seat from the rear extension housing.
Q08384
6.
REMOVE CENTER DIFFERENTIAL CONTROL COU-
PLING ASSEMBLY
(a)
Using a snap ring expander, remove the snap ring.
(b)
Remove the coupling assembly from the rear extension
housing.
Q02549
7.
REMOVE SEPARATOR AND OIL PUMP PLATE
Remove the 3 bolts, separator and oil pump plate.
8.
REMOVE VEHICLE SPEED SENSOR DRIVE GEAR
(a)
Using a snap ring expander, remove the snap ring.
(b)
Remove the vehicle speed sensor drive gear.
Q07138
Brought to you by BirfMark
Version 1.00 - 12/21/2010
TR0BI−01