Toyota 1996 LAND CRUISER User Manual page 1136

SA−74
SST
SST
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
6.
Using SST, remove the bearing outer race.
NOTICE:
Do not scratch the taper surface of the outer race.
7.
8.
SA2395
9.
Using SST, install the bearing outer race.
10.
SST
Z06903
11.
SST
(a)
(b)
(c)
Z06904
12.
(a)
(b)
(c)
R13238
(d)
13.
14.
15.
SA1966
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− REAR DIFFERENTIAL FRONT OIL SEAL
REMOVE BEARING OUTER RACE
SST 09308−00010
REMOVE BEARING SPACER
INSTALL NEW BEARING SPACER
INSTALL BEARING OUTER RACE
SST 09316−60011 (09316−00011, 09316−00021)
INSTALL FRONT BEARING
INSTALL OIL SLINGER AND OIL SEAL
Install the oil slinger.
Using SST, install a new oil seal, as shown.
SST 09214−76011
Oil seal drive in depth: 1.0 mm (0.039 in.)
Apply MP grease to the oil seal lip.
INSTALL COMPANION FLANGE
Using SST, install the companion flange on the drive pin-
ion.
SST 09950−30010 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03020)
Place the plate washer on the companion flange.
Apply light coat of gear oil on threads of a new companion
flange nut.
Using SST to hold the flange, torque the nut.
SST 09330−00021
Torque: 245 N·m (2,500 kgf·cm, 181 ft·lbf)
ADJUST DRIVE PINION PRELOAD
(See page SA−73)
STAKE DRIVE PINION NUT
CONNECT REAR PROPELLER SHAFT
(See page PR−5)