Toyota 1996 LAND CRUISER User Manual page 1093

SST
SST
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE
11. REMOVE COMPANION FLANGE
SST
(a) Using a chisel and hammer, unstake the nut.
(b) Using SST to hold the flange, remove the nut and plate
washer.
SST
SA2405
(c) Using SST, remove the companion flange.
SST
R13141
12. REMOVE OIL SEAL AND OIL SLINGER
(a) Using SST, remove the oil seal from the differential carrier.
SST
(b) Remove the oil slinger.
SA2402
13. REMOVE REAR BEARING
Using SST, remove the rear bearing from the drive pinion.
SST
Z00641
14. REMOVE DIFFERENTIAL CASE
(a) Place matchmarks on the bearing cap and differential car-
rier.
(b) Remove the 2 adjusting nut locks.
(c) Remove the 4 bolts and 2 bearing caps.
(d) w/o Differential lock:
Matchmarks Remove the 2 adjusting nuts.
(e) w/o Differential lock:
Remove the differential case with the side bearing outer
R13142
races from the carrier.
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− FRONT DIFFERENTIAL CARRIER
09330−00021
09950−30010 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03020)
09308−10010
09556−22010
SA−31