Toyota 1996 LAND CRUISER User Manual page 1076

SA−14
SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
SUSPENSION AND AXLE −
(d) Using SST, remove the bearing cap and shim from the
steering knuckle.
SST
HINT:
Use the SST without a collar.
S
In some cases, to satisfy the standard value of preload,
S
more than one shims are used.
(e) Using SST, remove the knuckle arm and shim from the
steering knuckle.
SST
HINT:
Use the SST without a collar.
S
In some cases, to satisfy the standard value of preload,
S
more than one shims are used.
9. REMOVE STEERING KNUCKLE AND BEARING
HINT:
Mark the removed adjusting shim and bearings so as to enable
reassembling them to their proper positions.
10. REMOVE OIL SEAL TO AXLE HOUSING
Using SST, remove the oil seal.
SST
Q07149
Brought to you by BirfMark
Version 1.00 - 12/21/2010
STEERING KNUCKLE AND AXLE SHAFT
09606−60020
09606−60020
09308−00010