Toyota 1996 LAND CRUISER User Manual page 1374

SST
1996 LAND CRUISER (RM451U)
Brought to you by BirfMark
TRANSFER
9. REMOVE REAR OUTPUT SHAFT
(a) Using a snap ring expander, remove the snap ring.
(b) Using SST and a hammer, remove the rear output shaft.
SST
(c) Remove the 2 seal rings from the rear output shaft.
TF0959
10. REMOVE DUST DEFLECTOR
(a) Using a screwdriver and hammer, remove the rear exten-
sion housing dust deflector.
(b) Using a screwdriver and hammer, remove the rear output
shaft dust deflector.
11. REMOVE OIL SEAL
Using a screwdriver, pry out the oil seal from the rear extension
housing.
Q08385
12. REMOVE BALL BEARING
(a) Using a screwdriver, remove the snap ring.
(b) Using SST and a press, remove the ball bearing to the
rear extension housing.
SST
SST
Q08481
Brought to you by BirfMark
Version 1.00 - 12/21/2010
− REAR EXTENSION HOUSING
09325−12010
09316−60011 (09316−00011, 09316−00021)
TR−31