Table of Contents
Advertisement
Chapter 4. User Maintenance
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional text Messages, press the volume up or
down key or press the HOLD key to move to the desired
Send Text Message.
14. Repeat steps 9-13 until all Send Text Messages are
entered.
15. Press the MEMORY key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Considerations
•
N/A
Set Special Day Mode
Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
38.)
You can specify up to 20 special days for the System. For each special day, you can specify up to 5
modes settings.
Operation
To set the Special Day Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 1.
100
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Next message number displays
Desired Text Message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8107-
System Mode displays
S-ICX-64-700
Advertisement
Table of Contents
