Engine Phasing - Husqvarna TR 650 TERRA 2013 Workshop Manual

TR 650 TERRA 2013 - TR 650 STRADA 2013
3
4
5 5 5
ENGINE SETTINGS AND ADJUSTMENTS

ENGINE PHASING

Proceed as follows to rephase the engine.
- Remove the head cover as described in chapter "F1".
- Lock the crankshaft as previously described.
- Remove the chain tensioner and guide as previously described.
- Remove the screws (1) with the washers.(2).
1
- Remove the top part of the support (3).
2
4
H11647
- Lift the camshaft (4) from the opposite side of the distribution gears to facilitate
the removal of the chain, then position the camshafts (4) so that the marks
(dashes) (5) are coplanar with the sealing surface.
- Reassemble all parts, in the reverse order compared to disassembly and
tighten the screws to the specified torque.
5
H11506
F.9
Workshop Manual Ed.09-2012