Foundry Networks IronPoint 200 User Manual page 80

Foundry IronPoint 200 User Guide
<access-list-id> – Enter a number for the ACL ID.
(Range: 1 - 10)
Default Setting
None
Command Mode
Global Configuration
Command Usage
You can configure up to 10 ACLs in an access point. Each ACL can have up to 10 entries.
The
access-list
permit and deny entries.
delete
description
Syntax
delete
Deletes all permit and deny statements from an ACL.
Default Setting
None.
Command Mode
ACL Configuration
deny
Disallows access to the access point from the specified IP address or from all IP addresses.
Syntax
deny <ip-address> <subnet-mask>
• Enter an IP address and subnet mask for <ip-address> <subnet-mask>.
Default Setting
None.
Command Mode
ACL Configuration
Command Usage
Use to disallow management access to the access point from any IP address.
any
Enter an IP address and its subnet mask if you want to disallow access only from a specified IP
address.
permit
Allows access to the access point from the specified IP address or from all IP addresses.
Syntax
permit any | <ip-address> <subnet-mask>
9-10
command takes you to the ACL configuration level, where you can enter or delete
© 2006 Foundry Networks, Inc. November 2006