Sntp-Server Ip; Sntp-Server Enable - Foundry Networks IronPoint 200 User Manual

sntp-server ip

This command sets the IP address of the servers to which SNTP time requests are issued. Use the
this command with no arguments to clear all time servers from the current list.
Syntax
sntp-server ip <1 | 2> <host_ip_address | host_name>
• 1 - First time server.
• 2 - Second time server.
• host_ip_address - The IP address of a time server (NTP or SNTP).
• host_name - The name of a time server (NTP or SNTP). (Range: 1-255 characters)
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp-server enable command, the sntp-server ip
command specifies the time servers from which the access point polls for time updates. The
access point will poll the time servers in the order specified until a response is received.

sntp-server enable

This command enables SNTP client requests for time synchronization with NTP or SNTP time
servers specified by the sntp-server ip command. Use the no form to disable SNTP client requests.
Syntax
sntp-server enable
no sntp-server enable
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record accurate dates and times for log events.
Without SNTP, the access point only records the time starting from the factory default set at the
last bootup (i.e., 00:14:00, January 1, 1970).
sntp-server daylight-saving
This command sets the start and end dates for daylight savings time. Use the no form to disable
daylight savings time.
Syntax
sntp-server daylight-saving
no sntp-server daylight-saving
November 2006 © 2006 Foundry Networks, Inc.
System Clock
13-3