Flash/File Commands - Foundry Networks IronPoint 200 User Manual

Command
snmp-server contact
snmp-server engine id
snmp-server enable server
snmp-server host
snmp-server trap
snmp-server location
snmp-server user
snmp-server targets
snmp-server filter
snmp-server filter-
assignment
show snmp groups
show snmp users
show snmp group-
assignments
show snmp target
show snmp filter
show snmp filter-
assignments
show snmp

Flash/File Commands

Command
bootfile
show bootfile
copy
delete
dir
December 2006
Function
Sets the system contact string
Sets the engine ID for SNMP v3
Enables SNMP service and traps
Specifies recipients of SNMP notifications
Enables specific SNMP notifications
Sets the system location string
Sets the name of the SNMP v3 user
Configures SNMP v3 notification targets
Configures SNMP v3 notification filters
Assigns SNMP v3 notification filters to targets
Displays the pre-defined SNMP v3 groups
Displays SNMP v3 user settings
Displays the assignment of users to SNMP v3 groups
Displays the SNMP v3 notification targets
Displays the SNMP v3 notification filters
Displays the SNMP v3 notification filter assignments
Displays the status of SNMP communications
Function
Specifies the file or image used to start up the system
Displays the name of the current operation code file that
booted the system
Copies a code image or configuration between flash
memory and a FTP/TFTP server
Deletes a file or code image
Displays a list of files in flash memory
© 2006 Foundry Networks, Inc.
Complete List of CLI Commands
Mode Page
GC 10-4
GC 10-10
GC 10-2
GC 10-4
GC 10-5
GC 10-3
GC 10-11
GC 10-16
GC 10-13
GC 10-17
Exec 10-12
Exec 10-12
Exec 10-12
Exec 10-17
Exec 10-14
Exec 10-17
Exec 10-6
Mode Page
GC 7-3
GC 7-3
Exec 7-1
Exec 7-4
Exec 7-2
5-5